Hamskea InSight Peep System Standard Peep Kit

The Hamskea InSight Peep System Standard Peep Kit delivers precision aiming with aerospace-grade anti-glare technology that eliminates light reflection and distortion for consistent sight pictures across varying conditions. Its baffled interior surface redirects unwanted light away from your eye, reducing frustration and improving accuracy. Dual string angle grooves accommodate both short and long axle-to-axle bows—37.5° for bows under 40" and 45° for 40" and longer. Built from black magnesium for superior durability and minimal glare, this 14-grain peep integrates seamlessly with Hamskea apertures and clarifying lenses. Purpose-engineered for serious archers demanding optical clarity and reliability.

Includes:

• Insight peep housing
• 6-apertures (1/32", 3/64", 1/16", 3/32", 1/8", 5/32")
• Aperture install tool
• Protective case
• Standard kit does not include clarifying lenses

SELECTING THE PROPER STRING GROOVE

For the best results, you will want your peep housing to sit as flat as possible at full draw for a straight line of sight towards the target.

1. Using the chart below, determine your approximate string angle based on Draw Length and Bow Length (Axle to Axle).
2. Once you have your approximate string angle you will be able to identify if you need either the 37.5º or 45º string grooves on the Standard InSight™ Peep housing, or if the 52.5º string groove present on the Short Draw Peep Housing would best fit your needs.

Note: These values are approximations and string angles may vary slightly depending on bow model and cam size.

You can easily identify string grooves on the Standard InSight Peep Housing by locating the small dimple present in the 45º string angle.  The string grooves without the dimple will be 37.5º.

THE INSIGHT PEEP SYSTEM INSTRUCTIONS

The InSight Peep System is made up of four main pieces including the light baffling peep housing, clarifying lens, aperture, and the aperture tool. There are 6 aperture sizes ranging from 1/32” up to 5/32” as well as 4 different clarifier lens strengths to accommodate a wide range of shooting setups. The peep housing can be used with or without a clarifying lens and has two sets of string grooves to better accommodate a wider range of shooters. We recommend installing/removing the apertures using the Hamskea Aperture Tool to avoid possible damage to the aperture.

Warning: You must properly tie your peep sight into the string before shooting. Failure to do so may result in personal injury or damage to equipment. Make sure that the peep is firmly held in place with the braided serving material going around the peep circumference and string material as seen below.